If your washing machine isn’t draining or spinning, it can be frustrating. Fortunately, there are a few things you can do to try and fix the problem. Here are five fixes for a washer that won’t drain or spin. Hopefully, one of these solutions will work for you.
- Check the drain hose for kinks or obstructions
It is important to check the drain hose for kinks or obstructions regularly. If the washer is not draining properly, it could be due to a blockage in the hose. Kinks can also prevent water from flowing freely, causing the washer to overflow. To check for obstructions, simply remove the drain hose and inspect it for any clogs. If you find one, use a plunger or a plumber’s snake to clear the blockage. Once the hose is clear, reattach it and make sure that there are no kinks. This will ensure that your washer drains properly and prevent flooding in your home.
- Make sure the washer is level—it should not be wobbling while it’s in use
If a washer is not level, it can wobble during use. This can cause the washer to become unbalanced and potentially damage clothing or the washer itself. To avoid this, it is important to make sure the washer is level before use. This can typically be done by adjusting the legs of the washer. Once the washer is level, it should not wobble during use. If it does, there may be an issue with the washer that should be addressed.
- Clean out the lint filter to ensure proper drainage
It is important to regularly clean out the lint filter in your washer to ensure proper drainage. A build-up of lint can block the drainage holes, causing water to back up and potentially flood your washer. In addition, a clogged lint filter can cause your washer to overheat, leading to damage to the appliance. To clean the lint filter, simply remove it from the washer and rinse it with warm water. You should also vacuum or brush away any lint that has accumulated around the filter housing. By taking a few minutes to clean the lint filter, you can help extend the life of your washer and prevent costly repairs.
- Check the pump for any blockages or leaks
One washer may not seem like much, but it can have a big impact on your pump’s performance. A washer helps to create a snug seal between the pump and the housing, preventing leaks. It also provides a barrier against dirt and debris, keeping the pump clean and running smoothly. Over time, washers can become worn or broken, causing leaks and reducing the pump’s efficiency. That’s why it’s important to check the washers regularly and replace them as needed. By taking this simple step, you can help to ensure that your pump will continue to perform at its best.
- Reset the machine if it’s not responding to your commands
If you’re having trouble getting your washer to respond to your commands, try resetting the machine. Unplug the washer for 30 seconds, then plug it back in and see if that does the trick. If the washer still isn’t responding, you may need to call a repair technician. In the meantime, try operating the washer manually to see if that gets it going.
Many washers will occasionally have a problem draining or spinning. Some simple fixes can solve these problems without the need for washer repair. However, if none of these solutions work, call a professional for washer repair in Denver.